Login

 
Registration

If you are not registered:

Register Now

Contact

Please do not hesitate to contact us if you have any queries, or visit our website:

Visit our Website
www.node4.co.uk

Email our helpdesk
info@node4.co.uk
sales@node4.co.uk
support@node4.co.uk

Call us
General enquiries: 0845 123 2222
Support: 0845 123 2229
Fax: 0845 123 2221

N4Status

Node4 status page detailing information about incidents and planned maintenance:

http://www.n4status.co.uk

Knowledgebase
How to run a Trace Route
Posted by Donald Mccallum on 31 July 2015 04:34 PM

How to run a Trace Route


Quick Guide
Click Start (Shortcut Windows + R).
Click Run.
Type “cmd” press Enter.
Type in command prompt “tracert (IP Address or URL)” press enter.
View results.
Copying and Pasting the results.
You can either take a screen shot of the results or….
Right Click in the command prompt window and Select Mark.
Highlight the text you want to copy and then press enter to copy the text.
Paste into anything to get the copied text.


Windows
STEP 1:
Click Start (Shortcut Windows Key + R).
Click Run.
Type in “cmd” press enter.

STEP 2:
This will bring up command prompt which will allow you to enter ms-dos commands.
Type in “tracert (IP address or URL)”
Press enter.
An example of this would be… “Tracert www.google.com“
Here are the following results.
Tracing route to www-tmmdi.l.google.com [173.194.37.104]
over a maximum of 30 hops:
1  1 ms <1 ms <1 ms n4-dry-fw-01.uk.node4.co.uk [10.2.0.250]

2  4 ms 4 ms 4 ms mx02-ge1.1.9-v11-dry.dc1.nodefour.net [83.166.160.244]

3  7 ms 7 ms 7 ms mx01-xe1.3.0-lon.gs.nodefour.net [83.166.164.37]

4  8 ms 7 ms 9 ms 195.66.224.125

5  28 ms 8 ms 9 ms 64.233.175.27

6  9 ms 9 ms 8 ms 209.85.251.202

7  8 ms 9 ms 7 ms 173.194.37.104

Trace complete.

 

CISCO
From router if you use the command "traceroute" then the destination.
Shown here:
WT-Nuneaton-RtrB#traceroute 8.8.8.8
Type escape sequence to abort.
Tracing the route to 8.8.8.8
VRF info: (vrf in name/id, vrf out name/id)


JUNIPER

traceroute host Several Modifers:<as-number-lookup><bypass-routing><clns><gateway address><inet | inet6><interface interface-name><logical system logical-system-name><monitor host><mpls (ldp FEC address | rsvp label-switched-path-name)><no-resolve><propagate-ttl><routing-instance routing-instance-name><source source-address><tos value><ttl value><wait seconds>

(0 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: